Efficacy and safety of a new heterologous fibrin biopolymer on socket bone healing after tooth extraction: An experimental pre-clinical study.

AIM: To assess the efficacy of heterologous fibrin biopolymer (HFB) in promoting alveolar bone healing after tooth extraction in rats. MATERIALS AND METHODS: The upper right incisors of 48 Wistar rats were extracted. Toothless sockets were filled with HFB (HFBG, n = 24) or blood clot (BCG, n = 24). The tooth extraction sites were subjected to micro-computed tomography (micro-CT), histological, histomorphometric and immunohistochemical (for Runt-related transcription factor 2/Runx2 and tartrate-resistant acid phosphatase/TRAP) analyses on days 0, 7, 14 and 42 after extraction. RESULTS: Socket volume remained similar between days 0 and 14 (69 ± 5.4 mm3), except in the BCG on day 14, when it was 10% lower (p = .043). Although the number of Runx2+ osteoblasts was high and similar in both groups (34 × 102 cells/mm2), the HFBG showed lower inflammatory process and osteoclast activity than BCG at 7 days. On day 14, the number of Runx2+ osteoblasts remained high and similar to the previous period in both groups. However, osteoclast activity increased. This increase was 55% lower in the HFBG than BCG. In the BCG, the presence of an inflammatory process and larger and numerous osteoclasts on day 14 led to resorption of the alveolar bone ridge and newly formed bone. On day 42, numbers of Runx2+ osteoblast and TRAP+ osteoclasts decreased dramatically in both groups. Although the BCG exhibited a more mature cortical bone formation, it exhibited a higher socket reduction (28.3 ± 6.67%) and smaller bone volume (37 ± 5.8 mm3) compared with HFBG (socket reduction of 14.8 ± 7.14% and total bone volume of 46 ± 5.4 mm3). CONCLUSIONS: HFB effectively suppresses osteoclast activity and reduces alveolar bone resorption compared with blood clot, thus preventing three-dimensional bone loss, particularly during the early healing period. HFB emerges as a promising biopharmaceutical material for enhancing healing processes after tooth extraction.

Standardized guidelines for Africanized honeybee venom production needed for development of new apilic antivenom

Africanized bees have spread across the Americas since 1956 and consequently resulted in human and animal deaths attributed to massive attacks related to exposure from Argentina to the USA. In Brazil, more than 100,000 accidents were registered in the last 5 years with a total of 303 deaths. To treat such massive attacks, Brazilian researchers developed the first specific antivenom against Africanized honey bee sting exposure. This unique product, the first of its kind in the world, has been safely tested in 20 patients during a Phase 2 clinical trial. To develop the antivenom, a standardized process was undertaken to extract primary venom antigens from the Africanized bees for immunization of serum-producing horses. This process involved extracting, purifying, fractionating, characterizing, and identifying the venom (apitoxin) employing mass spectrometry to generate standardized antigen for hyperimmunization of horses using the major toxins (melittin and its isoforms and phospholipase A2). The current guide describes standardization of the entire production chain of venom antigens in compliance with good manufacturing practices (GMP) required by regulatory agencies. Emphasis is placed upon the welfare of bees and horses during this process, as well as the development of a new biopharmaceutical to ultimately save lives.

Tissue Bioengineering with Fibrin Scaffolds and Deproteinized Bone Matrix Associated or Not with the Transoperative Laser Photobiomodulation Protocol.

Extending the range of use of the heterologous fibrin biopolymer, this pre-clinical study showed a new proportionality of its components directed to the formation of scaffold with a lower density of the resulting mesh to facilitate the infiltration of bone cells, and combined with therapy by laser photobiomodulation, in order to accelerate the repair process and decrease the morphofunctional recovery time. Thus, a transoperative protocol of laser photobiomodulation (L) was evaluated in critical bone defects filled with deproteinized bovine bone particles (P) associated with heterologous fibrin biopolymer (HF). The groups were: BCL (blood clot + laser); HF; HFL; PHF (P+HF); PHFL (P+HF+L). Microtomographically, bone volume (BV) at 14 days, was higher in the PHF and PHFL groups (10.45 ± 3.31 mm3 and 9.94 ± 1.51 mm3), significantly increasing in the BCL, HFL and PHFL groups. Histologically, in all experimental groups, the defects were not reestablished either in the external cortical bone or in the epidural, occurring only in partial bone repair. At 42 days, the bone area (BA) increased in all groups, being significantly higher in the laser-treated groups. The quantification of bone collagen fibers showed that the percentage of collagen fibers in the bone tissue was similar between the groups for each experimental period, but significantly higher at 42 days (35.71 ± 6.89%) compared to 14 days (18.94 ± 6.86%). It can be concluded that the results of the present study denote potential effects of laser radiation capable of inducing functional bone regeneration, through the synergistic combination of biomaterials and the new ratio of heterologous fibrin biopolymer components (1:1:1) was able to make the resulting fibrin mesh less dense and susceptible to cellular permeability. Thus, the best fibrinogen concentration should be evaluated to find the ideal heterologous fibrin scaffold.

Acetylcholine receptors of the neuromuscular junctions present normal distribution after peripheral nerve injury and repair through nerve guidance associated with fibrin biopolymer.

Peripheral nerve injuries (PNI) lead to alterations in the Agrin-LRP4-MuSK pathway. This results in disaggregation of AChRs and change from epsilon (mature, innervated) to gamma (immature, denervated) subunit. Tubulization technique has been shown to be effective for PNI repair and it also allows the use of adjuvants, such as fibrin biopolymer (FB). This study evaluated the effect of the association of tubulization with FB after PNI on AChRs and associated proteins. Fifty-two adults male Wistar rats were used, distributed in 4 experimental groups: Sham Control (S), Denervated Control (D); Tubulization (TB) and Tubulization + Fibrin Biopolymer (TB+FB). Catwalk was performed every 15 days. Ninety days after surgery the right soleus muscles and ischiatic nerves were submitted to the following analyses: (a) morphological and morphometric analysis of AChRs by confocal microscopy; (b) morphological and morphometric analysis of the ischiatic nerve; (c) protein quantification of AChRs: alpha, gama, and epsilon, of Schwann cells, agrin, LRP4, MuSK, rapsyn, MMP3, MyoD, myogenin, MURF1 and atrogin-1. The main results were about the NMJs that in the TB+FB group presented morphological and morphometric approximation (compactness index; area of the AChRs and motor plate) to the S group. In addition, there were also an increase of S100 and AChRε protein expression and a decrease of MyoD. These positive association resulted in AChRs stabilization that potentiate the neuromuscular regeneration, which strengthens the use of TB for severe injuries repair and the beneficial effect of FB, along with tubulization technique.

Heterologous fibrin biopolymer associated to a single suture stitch enables the return of neuromuscular junction to its mature pattern after peripheral nerve injury.

Denervation leads to severe atrophy of neuromuscular junction (NMJ) structure including decrease of the expression of fundamental proteins. Up to now, conventional suture has been the gold standard method used to correct this injury. Fibrin sealant is one of the alternatives proposed to optimize this method. This study verified if the association of fibrin sealant - Heterologous Fibrin Biopolymer (HFB) and a single suture stitch promotes return of morphology and NMJ structure to mature pattern after peripheral nerve injury. Forty Wistar rats were distributed into 4 groups: Sham-Control (SC), Denervated-Control (DC), Suture-Lesion (SL) and Suture-Lesion + HFB (SFS). In SC group only the right sciatic nerve identification was done. In DC, SL and SFS groups fixation of nerve stumps on musculature immediately after neurotmesis was performed. After seven days, stump reconnection with 3 stitches in SL and a single stitch associated with HFB in SFS were done. After sixty days right soleus muscles were prepared for nicotinic acetylcholine receptors (nAChRs) and nerve terminal confocal analyses, and for nAChRs (α1, ε e γ), S100, Agrin, LRP-4, MMP-3, Rapsyn western blotting analyses. SC group presented normal morphology. In DC group it was observed flattening of NMJ, fragmentation of nAChRs and tangled nerve terminals. The majority of the parameters of SL and SFS groups presented values in between SC and DC groups. There was an increase of relative planar area in these groups (SL and SFS) highlighting that there was less nAChRs fragmentation and the values of protein expression showed return of nAChRs to mature pattern. Use of HFB associated with a single suture stitch decreased surgical time, minimized suture injuries, did not alter nerve regeneration and presented potential to reestablish the NMJ apparatus. These consolidated results encourage surgeons to develop future clinical trials to install definitively this new approach both for reconstructive surgery and neurosurgery.

Photobiomodulation Therapy on the Guided Bone Regeneration Process in Defects Filled by Biphasic Calcium Phosphate Associated with Fibrin Biopolymer.

The aim is to evaluate the effects of photobiomodulation therapy (PBMT) on the guided bone regeneration process (GBR) in defects in the calvaria of rats filled with biphasic calcium phosphate associated with fibrin biopolymer. Thirty male Wistar rats were randomly separated: BMG (n = 10), defects filled with biomaterial and covered by membrane; BFMG (n = 10), biomaterial and fibrin biopolymer covered by membrane; and BFMLG (n = 10), biomaterial and fibrin biopolymer covered by membrane and biostimulated with PBMT. The animals were euthanized at 14 and 42 days postoperatively. Microtomographically, in 42 days, there was more evident bone growth in the BFMLG, limited to the margins of the defect with permanence of the particles. Histomorphologically, an inflammatory infiltrate was observed, which regressed with the formation of mineralized bone tissue. In the quantification of bone tissue, all groups had a progressive increase in new bone tissue with a significant difference in which the BFMLG showed greater bone formation in both periods (10.12 ± 0.67 and 13.85 ± 0.54), followed by BFMG (7.35 ± 0.66 and 9.41 ± 0.84) and BMG (4.51 ± 0.44 and 7.11 ± 0.44). Picrosirius-red staining showed greater birefringence of collagen fibers in yellow-green color in the BFMLG, showing more advanced bone maturation. PBMT showed positive effects capable of improving and accelerating the guided bone regeneration process when associated with biphasic calcium phosphate and fibrin biopolymer.

Effects of low-level laser therapy on autogenous bone graft stabilized with a new heterologous fibrin sealant.

Autogenous bone grafts are used to repair bone defects, and the stabilization is needed for bone regeneration. Laser photobiomodulation is a modality of treatment in clinical practice for tissue regeneration, and it has therapeutic effects as an anti-inflammatory, analgesic and modulating cellular activity. The aim of the present study was to evaluate the effects of low-level laser therapy (LLLT) on an autogenous bone graft integration process stabilized with a new heterologous fibrin sealant. Forty rats were divided into two groups: Autogenous Fibrin Graft (AFG, n=20), in which a 5mm dome osteotomy was conducted in the right parietal bone and the graft was adhered to the left side using fibrin sealant; and Autogenous Fibrin Graft Laser (AFGL, n=20), which was subjected to the same procedures as AFG with the addition of LLLT. The treatment was performed immediately following surgery and then three times a week until euthanasia, using an 830nm laser (30mW, 6J/cm(2), 0.116cm(2), 258.6mW/cm(2), 2.9J). Five animals from each group were euthanized at 10, 20, 30 and 40days postoperative, and the samples were submitted to histomorphological and histomorphometric analysis. Partial bone regeneration occurred, with new bone tissue integrating the graft to the recipient bed and small areas of connective tissue. Comparative analysis of the groups at the same intervals revealed minor interfaces in group AFGL, with statistically significant differences (p<0.05) at all of the analyzed intervals (10days p=0.0087, 20days p=0.0012, 30days p<0.0001, 40days p=0.0142). In conclusion, low-level laser therapy stimulated bone regeneration and accelerated the process of integration of autogenous bone grafts.

The new heterologous fibrin sealant in combination with low-level laser therapy (LLLT) in the repair of the buccal branch of the facial nerve.

This study aimed to evaluate the effects of low-level laser therapy (LLLT) in the repair of the buccal branch of the facial nerve with two surgical techniques: end-to-end epineural suture and coaptation with heterologous fibrin sealant. Forty-two male Wistar rats were randomly divided into five groups: control group (CG) in which the buccal branch of the facial nerve was collected without injury; (2) experimental group with suture (EGS) and experimental group with fibrin (EGF): The buccal branch of the facial nerve was transected on both sides of the face. End-to-end suture was performed on the right side and fibrin sealant on the left side; (3) Experimental group with suture and laser (EGSL) and experimental group with fibrin and laser (EGFL). All animals underwent the same surgical procedures in the EGS and EGF groups, in combination with the application of LLLT (wavelength of 830 nm, 30 mW optical power output of potency, and energy density of 6 J/cm(2)). The animals of the five groups were euthanized at 5 weeks post-surgery and 10 weeks post-surgery. Axonal sprouting was observed in the distal stump of the facial nerve in all experimental groups. The observed morphology was similar to the fibers of the control group, with a predominance of myelinated fibers. In the final period of the experiment, the EGSL presented the closest results to the CG, in all variables measured, except in the axon area. Both surgical techniques analyzed were effective in the treatment of peripheral nerve injuries, where the use of fibrin sealant allowed the manipulation of the nerve stumps without trauma. LLLT exhibited satisfactory results on facial nerve regeneration, being therefore a useful technique to stimulate axonal regeneration process.

Use of a New Fibrin Sealant and Laser Irradiation in the Repair of Skull Defects in Rats

This study evaluated the osteogenic capacity of a new fibrin sealant (FS) combined with bone graft and laser irradiation in the bone repair. Defects were created in the skull of 30 rats and filled with autogenous graft and FS derived from snake venom. Immediately after implantation, low-power laser was applied on the surgical site. The animals were divided in: control group with autogenous graft (G1), autogenous graft and laser 5 J/cm2 (G2), autogenous graft and laser 7 J/cm2 (G3), autogenous graft and FS (G4), autogenous graft, FS and laser 5 J/cm2 (G5), autogenous graft, FS and laser 7 J/cm2 (G6). The animals were sacrificed 6 weeks after implant. Results showed absence of inflammatory infiltrate in the bone defect. New bone formation occurred in all groups, but it was most intense in G6. Thus, the FS and laser 7 J/cm2 showed osteoconductive capacity and can be an interesting resource to be applied in surgery of bone reconstruction.

Este estudo avaliou a capacidade osteogênica de um novo selante de fibrina (FS) associado com enxerto ósseo e irradiação laser no reparo ósseo. Defeitos foram criados no crânio de 30 ratos e preenchidos com enxerto autógeno e FS derivado do veneno de cobra. Imediatamente após implantação, foi aplicado laser de baixa potência na área cirúrgica. Os animais foram divididos em grupo controle com autógeno (G1), autógeno e laser 5 J/cm2 (G2), autógeno e laser 7J/cm2 (G3), autógeno e FS (G4), autógeno, FS e laser 5J/cm2 (G5), autógeno, FS e laser 7J/cm2 (G6). Os animais foram sacrificados 6 semanas após implante. Resultados mostraram ausência de infiltrado inflamatório no defeito ósseo. Neoformação óssea ocorreu em todos os grupos, entretanto, foi mais intenso em G6. Desta maneira, o FS e laser 7J/cm2 mostraram capacidade osteocondutiva e podem ser um interessante recurso a ser aplicado nas cirurgias de reconstrução óssea.

Identification of a novel melittin isoform from Africanized Apis mellifera venom

Apis mellifera, the European honey bee, is perhaps the most studied insect in the Apidae family. Its venom is comprised basically of melittin, phospholipase A2, histamine, hyaluronidase, cathecolamines and serotonin. Some of these components have been associated to allergic reactions, among several other symptoms. On the other hand, bee mass-stinging is increasingly becoming a serious public health issue; therefore, the development of efficient serum-therapies has become necessary, with a consequent better characterization of the venom. In this work, we report the isolation and biochemical characterization of melittin-S, an isoform of melittin comprising a Ser residue at the 10th position, from the venom of Africanized A. mellifera. This peptide demonstrated to be less hemolytic than melittin and to adopt a less organized secondary structure, as assessed by circular dichroism spectroscopy. Melittin-S venom contents varied seasonally, and the maximum secretion occurred during the (southern) winter months. Data on the variation of the honey bee venom composition are necessary to guide future immunological studies, aiming for the development of an efficient anti-serum against Africanized A. mellifera venom and, consequently, an effective treatment for the victims of mass-stinging.